Expert Pool Table Removalists In Mornington - Safe Handling Guaranteed

The pool table is of many types and demands different approaches to move from one point to another. Our planning depends on the type, size, and distances your pool table needs to cover. Our pool table movers in Mornington take the task of moving seriously and manage the given process carefully.

Here Are The Steps Followed By Pool Table Movers In Mornington To Relocate A Pool Table:

1. Prepare A Floor Plan Before Moving: Our pool table movers in Mornington will closely investigate your table before moving to ensure it is in acceptable condition with no wrecked pieces that need repairs. We sort out how much space you need to move the table through and out of the home without bringing on any harm. We use a measurement tape to measure every entryway, passage, or flight of stairs through which your pool table may need to travel through.

2. Pick Up The Tools: Our toolbox is fully equipped with safety glasses, a set of flathead screwdrivers, a power drill, a level, and have something to remove the staples from the felt. Our team of professional pool table removalists in Mornington covers it using thick blankets, bubble wrap and packing tape to ensure the table makes it without damage. We place all the screws, bolts, and nuts in labeled re-sealable bags for easy reassembly.

3. Detach The Pockets: Although the pockets on pool tables can be fixed differently, they generally are secure to the table using suitable staples, screws, or bolts. Lying on the back of one of our workers under the pocket (wearing the safety glasses), with total care, we remove the pocket and keep the pocket and screws aside together.

4. Remove The Rails: We detach the bolts from the underside of the rails and then slide them out. Our pool table movers will flip them over together before disconnecting. And then, place the bolts in a pre-labeled re-sealable bag and wrap the rails securely.

5. Detach The Felt: To detach the felt, we determine if the felt is connected to the table by staples or glue. If staples have been used, then we separate the staples. If glue has been used, then we gently pull the felt backward (not forwards or upwards as you risk stretching or tearing) until the felt has been removed from the slate of the table.

6. Remove The Slate: This heavy work will be appropriately addressed. The slate is usually screwed into the table's frame so that we will take our power drill. Often the screws can be tricky to find as wax has been used on the head of the screws to prevent damage. We scrape the wax off before removing the screws and put the screws in a pre-labeled re-sealable bag. And make sure that the slate is well protected before moving.

7. Remove The Legs: Detach the bolts attaching the legs to the frame; then again, make sure you put the bolts in a re-sealable bag and protect the legs with sheets or wrap.

8. Packing & Transportation: The packaging will be done according to the size and type of each pool table component. Every part of the pool table is packed in its respective packings and labeled carefully. All the components will be loaded in a truck for transportation. After a successful relocation, our pool table movers in Mornington will reassemble all the parts and make the pool table ready to use.